Поддержка Рутокен ЭЦП в OpenSSL (Страница 14 из 17)

 openssl engine -v
Error configuring OpenSSL
140255997572768:error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library:dso_dlfcn.c:187:filename(/usr/lib/pkcs11-gost/pkcs11_gost.so): /usr/lib/pkcs11-gost/pkcs11_gost.so: undefined symbol: ASN1_OCTET_STRING_it
140255997572768:error:25070067:DSO support routines:DSO_load:could not load the shared library:dso_lib.c:233:
140255997572768:error:260B6084:engine routines:DYNAMIC_LOAD:dso not found:eng_dyn.c:467:
140255997572768:error:260BC066:engine routines:INT_ENGINE_CONFIGURE:engine configuration error:eng_cnf.c:191:section=pkcs11_section, name=dynamic_path, value=/usr/lib/pkcs11-gost/pkcs11_gost.so
140255997572768:error:0E07606D:configuration file routines:MODULE_RUN:module initialization error:conf_mod.c:223:module=engines, value=engine_section, retcode=-1

cat /etc/ssl/openssl.cnf
#
# OpenSSL example configuration file.
# This is mostly being used for generation of certificate requests.
#

# This definition stops the following lines choking if HOME isn't
# defined.
HOME                    = .
RANDFILE                = $ENV::HOME/.rnd


# Extra OBJECT IDENTIFIER info:
#oid_file               = $ENV::HOME/.oid
oid_section             = new_oids
openssl_conf = openssl_def


# To use this configuration file with the "-extfile" option of the
# "openssl x509" utility, name here the section containing the
# X.509v3 extensions to use:
# extensions            =
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)

[ new_oids ]

# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
# Add a simple OID like this:
# testoid1=1.2.3.4
# Or use config file substitution like this:
# testoid2=${testoid1}.5.6

# Policies used by the TSA examples.
tsa_policy1 = 1.2.3.4.1
tsa_policy2 = 1.2.3.4.5.6
tsa_policy3 = 1.2.3.4.5.7

####################################################################
[ ca ]
default_ca      = CA_default            # The default ca section

####################################################################
[ CA_default ]

dir             = ./demoCA              # Where everything is kept
certs           = $dir/certs            # Where the issued certs are kept
crl_dir         = $dir/crl              # Where the issued crl are kept
database        = $dir/index.txt        # database index file.
#unique_subject = no                    # Set to 'no' to allow creation of
                                        # several ctificates with same subject.
new_certs_dir   = $dir/newcerts         # default place for new certs.

certificate     = $dir/cacert.pem       # The CA certificate
serial          = $dir/serial           # The current serial number
crlnumber       = $dir/crlnumber        # the current crl number
                                        # must be commented out to leave a V1 CRL
crl             = $dir/crl.pem          # The current CRL
private_key     = $dir/private/cakey.pem# The private key
RANDFILE        = $dir/private/.rand    # private random number file

x509_extensions = usr_cert              # The extentions to add to the cert

# Comment out the following two lines for the "traditional"
# (and highly broken) format.
name_opt        = ca_default            # Subject Name options
cert_opt        = ca_default            # Certificate field options

# Extension copying option: use with caution.
# copy_extensions = copy

# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
# so this is commented out by default to leave a V1 CRL.
# crlnumber must also be commented out to leave a V1 CRL.
# crl_extensions        = crl_ext

default_days    = 365                   # how long to certify for
default_crl_days= 30                    # how long before next CRL
default_md      = default               # use public key default MD
preserve        = no                    # keep passed DN ordering

# A few difference way of specifying how similar the request should look
# For type CA, the listed attributes must be the same, and the optional
# and supplied fields are just that :-)
policy          = policy_match

# For the CA policy
[ policy_match ]
countryName             = match
stateOrProvinceName     = match
organizationName        = match
organizationalUnitName  = optional
commonName              = supplied
emailAddress            = optional

# For the 'anything' policy
# At this point in time, you must list all acceptable 'object'
# types.
[ policy_anything ]
countryName             = optional
stateOrProvinceName     = optional
localityName            = optional
organizationName        = optional
organizationalUnitName  = optional
commonName              = supplied
emailAddress            = optional

####################################################################
[ req ]
default_bits            = 2048
default_keyfile         = privkey.pem
distinguished_name      = req_distinguished_name
attributes              = req_attributes
x509_extensions = v3_ca # The extentions to add to the self signed cert

# Passwords for private keys if not present they will be prompted for
# input_password = secret
# output_password = secret

# This sets a mask for permitted string types. There are several options.
# default: PrintableString, T61String, BMPString.
# pkix   : PrintableString, BMPString (PKIX recommendation before 2004)
# utf8only: only UTF8Strings (PKIX recommendation after 2004).
# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
# MASK:XXXX a literal mask value.
# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
string_mask = utf8only

# req_extensions = v3_req # The extensions to add to a certificate request

[ req_distinguished_name ]
countryName                     = Country Name (2 letter code)
countryName_default             = AU
countryName_min                 = 2
countryName_max                 = 2

stateOrProvinceName             = State or Province Name (full name)
stateOrProvinceName_default     = Some-State

localityName                    = Locality Name (eg, city)

0.organizationName              = Organization Name (eg, company)
0.organizationName_default      = Internet Widgits Pty Ltd

# we can do this but it is not needed normally :-)
#1.organizationName             = Second Organization Name (eg, company)
#1.organizationName_default     = World Wide Web Pty Ltd

organizationalUnitName          = Organizational Unit Name (eg, section)
#organizationalUnitName_default =

commonName                      = Common Name (e.g. server FQDN or YOUR name)
commonName_max                  = 64

emailAddress                    = Email Address
emailAddress_max                = 64

# SET-ex3                       = SET extension number 3

[ req_attributes ]
challengePassword               = A challenge password
challengePassword_min           = 4
challengePassword_max           = 20

unstructuredName                = An optional company name

[ usr_cert ]

# These extensions are added when 'ca' signs a request.

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType                    = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment                       = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl              = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This is required for TSA certificates.
# extendedKeyUsage = critical,timeStamping

[ v3_req ]

# Extensions to add to a certificate request

basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment

[ v3_ca ]


# Extensions for a typical CA


# PKIX recommendation.

subjectKeyIdentifier=hash

authorityKeyIdentifier=keyid:always,issuer

# This is what PKIX recommends but some broken software chokes on critical
# extensions.
#basicConstraints = critical,CA:true
# So we do this instead.
basicConstraints = CA:true

# Key usage: this is typical for a CA certificate. However since it will
# prevent it being used as an test self-signed certificate it is best
# left out by default.
# keyUsage = cRLSign, keyCertSign

# Some might want this also
# nsCertType = sslCA, emailCA

# Include email address in subject alt name: another PKIX recommendation
# subjectAltName=email:copy
# Copy issuer details
# issuerAltName=issuer:copy

# DER hex encoding of an extension: beware experts only!
# obj=DER:02:03
# Where 'obj' is a standard or added object
# You can even override a supported extension:
# basicConstraints= critical, DER:30:03:01:01:FF

[ crl_ext ]

# CRL extensions.
# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.

# issuerAltName=issuer:copy
authorityKeyIdentifier=keyid:always

[ proxy_cert_ext ]
# These extensions should be added when creating a proxy certificate

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType                    = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment                       = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl              = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This really needs to be in place for it to be a proxy certificate.
proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

####################################################################
[ tsa ]

default_tsa = tsa_config1       # the default TSA section

[ tsa_config1 ]

# These are used by the TSA reply generation only.
dir             = ./demoCA              # TSA root directory
serial          = $dir/tsaserial        # The current serial number (mandatory)
crypto_device   = builtin               # OpenSSL engine to use for signing
signer_cert     = $dir/tsacert.pem      # The TSA signing certificate
                                        # (optional)
certs           = $dir/cacert.pem       # Certificate chain to include in reply
                                        # (optional)
signer_key      = $dir/private/tsakey.pem # The TSA private key (optional)

default_policy  = tsa_policy1           # Policy if request did not specify it
                                        # (optional)
other_policies  = tsa_policy2, tsa_policy3      # acceptable policies (optional)
digests         = md5, sha1             # Acceptable message digests (mandatory)
accuracy        = secs:1, millisecs:500, microsecs:100  # (optional)
clock_precision_digits  = 0     # number of digits after dot. (optional)
ordering                = yes   # Is ordering defined for timestamps?
                                # (optional, default: no)
tsa_name                = yes   # Must the TSA name be included in the reply?
                                # (optional, default: no)
ess_cert_id_chain       = no    # Must the ESS cert id chain be included?
                                # (optional, default: no)


[openssl_def]
engines = engine_section

[engine_section]
pkcs11 = pkcs11_section


[pkcs11_section]
engine_id = pkcs11
dynamic_path = /usr/lib/pkcs11-gost/pkcs11_gost.so
MODULE_PATH = /usr/lib/pkcs11-gost/librtpkcs11ecp.so
init = 0

openssl engine -v
Error configuring OpenSSL
140255997572768:error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library:dso_dlfcn.c:187:filename(/usr/lib/pkcs11-gost/pkcs11_gost.so): /usr/lib/pkcs11-gost/pkcs11_gost.so: undefined symbol: ASN1_OCTET_STRING_it
140255997572768:error:25070067:DSO support routines:DSO_load:could not load the shared library:dso_lib.c:233:
140255997572768:error:260B6084:engine routines:DYNAMIC_LOAD:dso not found:eng_dyn.c:467:
140255997572768:error:260BC066:engine routines:INT_ENGINE_CONFIGURE:engine configuration error:eng_cnf.c:191:section=pkcs11_section, name=dynamic_path, value=/usr/lib/pkcs11-gost/pkcs11_gost.so
140255997572768:error:0E07606D:configuration file routines:MODULE_RUN:module initialization error:conf_mod.c:223:module=engines, value=engine_section, retcode=-1

cat /usr/local/ssl/openssl.cnf
#
# OpenSSL example configuration file.
# This is mostly being used for generation of certificate requests.
#

# This definition stops the following lines choking if HOME isn't
# defined.
HOME                    = .
RANDFILE                = $ENV::HOME/.rnd

# Extra OBJECT IDENTIFIER info:
#oid_file               = $ENV::HOME/.oid
oid_section             = new_oids
#openssl_conf = openssl_def


# To use this configuration file with the "-extfile" option of the
# "openssl x509" utility, name here the section containing the
# X.509v3 extensions to use:
# extensions            =
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)

[ new_oids ]

# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
# Add a simple OID like this:
# testoid1=1.2.3.4
# Or use config file substitution like this:
# testoid2=${testoid1}.5.6

# Policies used by the TSA examples.
tsa_policy1 = 1.2.3.4.1
tsa_policy2 = 1.2.3.4.5.6
tsa_policy3 = 1.2.3.4.5.7

####################################################################
[ ca ]
default_ca      = CA_default            # The default ca section

####################################################################
[ CA_default ]

dir             = ./demoCA              # Where everything is kept
certs           = $dir/certs            # Where the issued certs are kept
crl_dir         = $dir/crl              # Where the issued crl are kept
database        = $dir/index.txt        # database index file.
#unique_subject = no                    # Set to 'no' to allow creation of
                                        # several ctificates with same subject.
new_certs_dir   = $dir/newcerts         # default place for new certs.

certificate     = $dir/cacert.pem       # The CA certificate
serial          = $dir/serial           # The current serial number
crlnumber       = $dir/crlnumber        # the current crl number
                                        # must be commented out to leave a V1 CRL
crl             = $dir/crl.pem          # The current CRL
private_key     = $dir/private/cakey.pem# The private key
RANDFILE        = $dir/private/.rand    # private random number file

x509_extensions = usr_cert              # The extentions to add to the cert

# Comment out the following two lines for the "traditional"
# (and highly broken) format.
name_opt        = ca_default            # Subject Name options
cert_opt        = ca_default            # Certificate field options

# Extension copying option: use with caution.
# copy_extensions = copy

# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
# so this is commented out by default to leave a V1 CRL.
# crlnumber must also be commented out to leave a V1 CRL.
# crl_extensions        = crl_ext

default_days    = 365                   # how long to certify for
default_crl_days= 30                    # how long before next CRL
default_md      = default               # use public key default MD
preserve        = no                    # keep passed DN ordering

# A few difference way of specifying how similar the request should look
# For type CA, the listed attributes must be the same, and the optional
# and supplied fields are just that :-)
policy          = policy_match

# For the CA policy
[ policy_match ]
countryName             = match
stateOrProvinceName     = match
organizationName        = match
organizationalUnitName  = optional
commonName              = supplied
emailAddress            = optional

# For the 'anything' policy
# At this point in time, you must list all acceptable 'object'
# types.
[ policy_anything ]
countryName             = optional
stateOrProvinceName     = optional
localityName            = optional
organizationName        = optional
organizationalUnitName  = optional
commonName              = supplied
emailAddress            = optional

####################################################################
[ req ]
default_bits            = 2048
default_keyfile         = privkey.pem
distinguished_name      = req_distinguished_name
attributes              = req_attributes
x509_extensions = v3_ca # The extentions to add to the self signed cert

# Passwords for private keys if not present they will be prompted for
# input_password = secret
# output_password = secret

# This sets a mask for permitted string types. There are several options.
# default: PrintableString, T61String, BMPString.
# pkix   : PrintableString, BMPString (PKIX recommendation before 2004)
# utf8only: only UTF8Strings (PKIX recommendation after 2004).
# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
# MASK:XXXX a literal mask value.
# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
string_mask = utf8only

# req_extensions = v3_req # The extensions to add to a certificate request

[ req_distinguished_name ]
countryName                     = Country Name (2 letter code)
countryName_default             = AU
countryName_min                 = 2
countryName_max                 = 2

stateOrProvinceName             = State or Province Name (full name)
stateOrProvinceName_default     = Some-State

localityName                    = Locality Name (eg, city)

0.organizationName              = Organization Name (eg, company)
0.organizationName_default      = Internet Widgits Pty Ltd

# we can do this but it is not needed normally :-)
#1.organizationName             = Second Organization Name (eg, company)
#1.organizationName_default     = World Wide Web Pty Ltd

organizationalUnitName          = Organizational Unit Name (eg, section)
#organizationalUnitName_default =

commonName                      = Common Name (e.g. server FQDN or YOUR name)
commonName_max                  = 64

emailAddress                    = Email Address
emailAddress_max                = 64

# SET-ex3                       = SET extension number 3

[ req_attributes ]
challengePassword               = A challenge password
challengePassword_min           = 4
challengePassword_max           = 20

unstructuredName                = An optional company name

[ usr_cert ]

# These extensions are added when 'ca' signs a request.

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType                    = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment                       = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl              = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This is required for TSA certificates.
# extendedKeyUsage = critical,timeStamping

[ v3_req ]

# Extensions to add to a certificate request

basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment

[ v3_ca ]


# Extensions for a typical CA


# PKIX recommendation.

subjectKeyIdentifier=hash

authorityKeyIdentifier=keyid:always,issuer

# This is what PKIX recommends but some broken software chokes on critical
# extensions.
#basicConstraints = critical,CA:true
# So we do this instead.
basicConstraints = CA:true

# Key usage: this is typical for a CA certificate. However since it will
# prevent it being used as an test self-signed certificate it is best
# left out by default.
# keyUsage = cRLSign, keyCertSign

# Some might want this also
# nsCertType = sslCA, emailCA

# Include email address in subject alt name: another PKIX recommendation
# subjectAltName=email:copy
# Copy issuer details
# issuerAltName=issuer:copy

# DER hex encoding of an extension: beware experts only!
# obj=DER:02:03
# Where 'obj' is a standard or added object
# You can even override a supported extension:
# basicConstraints= critical, DER:30:03:01:01:FF

[ crl_ext ]

# CRL extensions.
# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.

# issuerAltName=issuer:copy
authorityKeyIdentifier=keyid:always

[ proxy_cert_ext ]
# These extensions should be added when creating a proxy certificate

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType                    = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment                       = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl              = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This really needs to be in place for it to be a proxy certificate.
proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

####################################################################
[ tsa ]

default_tsa = tsa_config1       # the default TSA section

[ tsa_config1 ]

# These are used by the TSA reply generation only.
dir             = ./demoCA              # TSA root directory
serial          = $dir/tsaserial        # The current serial number (mandatory)
crypto_device   = builtin               # OpenSSL engine to use for signing
signer_cert     = $dir/tsacert.pem      # The TSA signing certificate
                                        # (optional)
certs           = $dir/cacert.pem       # Certificate chain to include in reply
                                        # (optional)
signer_key      = $dir/private/tsakey.pem # The TSA private key (optional)

default_policy  = tsa_policy1           # Policy if request did not specify it
                                        # (optional)
other_policies  = tsa_policy2, tsa_policy3      # acceptable policies (optional)
digests         = md5, sha1             # Acceptable message digests (mandatory)
accuracy        = secs:1, millisecs:500, microsecs:100  # (optional)
clock_precision_digits  = 0     # number of digits after dot. (optional)
ordering                = yes   # Is ordering defined for timestamps?
                                # (optional, default: no)
tsa_name                = yes   # Must the TSA name be included in the reply?
                                # (optional, default: no)
ess_cert_id_chain       = no    # Must the ESS cert id chain be included?
                                # (optional, default: no)


[openssl_def]
engines = engine_section

[engine_section]
pkcs11 = pkcs11_section


[pkcs11_section]
engine_id = pkcs11
dynamic_path = /usr/lib/pkcs11-gost/pkcs11_gost.so
MODULE_PATH = /usr/lib/pkcs11-gost/librtpkcs11ecp.so
init = 0

 openssl engine -v
(rdrand) Intel RDRAND engine
(dynamic) Dynamic engine loading support
     SO_PATH, NO_VCHECK, ID, LIST_ADD, DIR_LOAD, DIR_ADD, LOAD
(4758cca) IBM 4758 CCA hardware engine support
     SO_PATH
(aep) Aep hardware engine support
     SO_PATH
(atalla) Atalla hardware engine support
     SO_PATH
(cswift) CryptoSwift hardware engine support
     SO_PATH
(chil) CHIL hardware engine support
     SO_PATH, FORK_CHECK, THREAD_LOCKING
(nuron) Nuron hardware engine support
     SO_PATH
(sureware) SureWare hardware engine support
(ubsec) UBSEC hardware engine support
     SO_PATH
(gost) Reference implementation of GOST engine
     CRYPT_PARAMS

openssl smime -sign -engine pkcs11_gost -in request.xml -out request.xml.sig -signer siga.pem -outform DER
can't use that engine
139740780213904:error:80001401:Vendor defined:PKCS11_CTX_load:Unable to load PKCS#11 module:/home/jenkins/newjenkins/workspace/pkcs11gost_engine/platform/linux-x86_64-gcc/target/release/libp11/src/p11_load.c:68:
139740780213904:error:260B806D:engine routines:ENGINE_TABLE_REGISTER:init failed:eng_table.c:175:

openssl engine -v
(dynamic) Dynamic engine loading support
     SO_PATH, NO_VCHECK, ID, LIST_ADD, DIR_LOAD, DIR_ADD, LOAD
(gost) Reference implementation of GOST engine
     CRYPT_PARAMS
(pkcs11_gost) pkcs11 gost engine
     SO_PATH, MODULE_PATH, VERBOSE, QUIET, PIN

 openssl version
OpenSSL 1.0.2 22 Jan 2015

cat /etc/ssl/openssl.cnf
#
# OpenSSL example configuration file.
# This is mostly being used for generation of certificate requests.
#

# This definition stops the following lines choking if HOME isn't
# defined.
HOME                    = .
RANDFILE                = $ENV::HOME/.rnd

# Extra OBJECT IDENTIFIER info:
#oid_file               = $ENV::HOME/.oid
oid_section             = new_oids
openssl_conf            = openssl_def

# To use this configuration file with the "-extfile" option of the
# "openssl x509" utility, name here the section containing the
# X.509v3 extensions to use:
# extensions            =
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)

[ new_oids ]

# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
# Add a simple OID like this:
# testoid1=1.2.3.4
# Or use config file substitution like this:
# testoid2=${testoid1}.5.6

# Policies used by the TSA examples.
tsa_policy1 = 1.2.3.4.1
tsa_policy2 = 1.2.3.4.5.6
tsa_policy3 = 1.2.3.4.5.7

####################################################################
[ ca ]
default_ca      = CA_default            # The default ca section

####################################################################
[ CA_default ]

dir             = ./demoCA              # Where everything is kept
certs           = $dir/certs            # Where the issued certs are kept
crl_dir         = $dir/crl              # Where the issued crl are kept
database        = $dir/index.txt        # database index file.
#unique_subject = no                    # Set to 'no' to allow creation of
                                        # several ctificates with same subject.
new_certs_dir   = $dir/newcerts         # default place for new certs.

certificate     = $dir/cacert.pem       # The CA certificate
serial          = $dir/serial           # The current serial number
crlnumber       = $dir/crlnumber        # the current crl number
                                        # must be commented out to leave a V1 CRL
crl             = $dir/crl.pem          # The current CRL
private_key     = $dir/private/cakey.pem# The private key
RANDFILE        = $dir/private/.rand    # private random number file

x509_extensions = usr_cert              # The extentions to add to the cert

# Comment out the following two lines for the "traditional"
# (and highly broken) format.
name_opt        = ca_default            # Subject Name options
cert_opt        = ca_default            # Certificate field options

# Extension copying option: use with caution.
# copy_extensions = copy

# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
# so this is commented out by default to leave a V1 CRL.
# crlnumber must also be commented out to leave a V1 CRL.
# crl_extensions        = crl_ext

default_days    = 365                   # how long to certify for
default_crl_days= 30                    # how long before next CRL
default_md      = default               # use public key default MD
preserve        = no                    # keep passed DN ordering

# A few difference way of specifying how similar the request should look
# For type CA, the listed attributes must be the same, and the optional
# and supplied fields are just that :-)
policy          = policy_match

# For the CA policy
[ policy_match ]
countryName             = match
stateOrProvinceName     = match
organizationName        = match
organizationalUnitName  = optional
commonName              = supplied
emailAddress            = optional

# For the 'anything' policy
# At this point in time, you must list all acceptable 'object'
# types.
[ policy_anything ]
countryName             = optional
stateOrProvinceName     = optional
localityName            = optional
organizationName        = optional
organizationalUnitName  = optional
commonName              = supplied
emailAddress            = optional

####################################################################
[ req ]
default_bits            = 2048
default_keyfile         = privkey.pem
distinguished_name      = req_distinguished_name
attributes              = req_attributes
x509_extensions = v3_ca # The extentions to add to the self signed cert

# Passwords for private keys if not present they will be prompted for
# input_password = secret
# output_password = secret

# This sets a mask for permitted string types. There are several options.
# default: PrintableString, T61String, BMPString.
# pkix   : PrintableString, BMPString (PKIX recommendation before 2004)
# utf8only: only UTF8Strings (PKIX recommendation after 2004).
# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
# MASK:XXXX a literal mask value.
# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
string_mask = utf8only

# req_extensions = v3_req # The extensions to add to a certificate request

[ req_distinguished_name ]
countryName                     = Country Name (2 letter code)
countryName_default             = AU
countryName_min                 = 2
countryName_max                 = 2

stateOrProvinceName             = State or Province Name (full name)
stateOrProvinceName_default     = Some-State

localityName                    = Locality Name (eg, city)

0.organizationName              = Organization Name (eg, company)
0.organizationName_default      = Internet Widgits Pty Ltd

# we can do this but it is not needed normally :-)
#1.organizationName             = Second Organization Name (eg, company)
#1.organizationName_default     = World Wide Web Pty Ltd

organizationalUnitName          = Organizational Unit Name (eg, section)
#organizationalUnitName_default =

commonName                      = Common Name (e.g. server FQDN or YOUR name)
commonName_max                  = 64

emailAddress                    = Email Address
emailAddress_max                = 64

# SET-ex3                       = SET extension number 3

[ req_attributes ]
challengePassword               = A challenge password
challengePassword_min           = 4
challengePassword_max           = 20

unstructuredName                = An optional company name

[ usr_cert ]

# These extensions are added when 'ca' signs a request.

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType                    = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment                       = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl              = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This is required for TSA certificates.
# extendedKeyUsage = critical,timeStamping

[ v3_req ]

# Extensions to add to a certificate request

basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment

[ v3_ca ]


# Extensions for a typical CA


# PKIX recommendation.

subjectKeyIdentifier=hash

authorityKeyIdentifier=keyid:always,issuer

# This is what PKIX recommends but some broken software chokes on critical
# extensions.
#basicConstraints = critical,CA:true
# So we do this instead.
basicConstraints = CA:true

# Key usage: this is typical for a CA certificate. However since it will
# prevent it being used as an test self-signed certificate it is best
# left out by default.
# keyUsage = cRLSign, keyCertSign

# Some might want this also
# nsCertType = sslCA, emailCA

# Include email address in subject alt name: another PKIX recommendation
# subjectAltName=email:copy
# Copy issuer details
# issuerAltName=issuer:copy

# DER hex encoding of an extension: beware experts only!
# obj=DER:02:03
# Where 'obj' is a standard or added object
# You can even override a supported extension:
# basicConstraints= critical, DER:30:03:01:01:FF

[ crl_ext ]

# CRL extensions.
# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.

# issuerAltName=issuer:copy
authorityKeyIdentifier=keyid:always

[ proxy_cert_ext ]
# These extensions should be added when creating a proxy certificate

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType                    = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment                       = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl              = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This really needs to be in place for it to be a proxy certificate.
proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

####################################################################
[ tsa ]

default_tsa = tsa_config1       # the default TSA section

[ tsa_config1 ]

# These are used by the TSA reply generation only.
dir             = ./demoCA              # TSA root directory
serial          = $dir/tsaserial        # The current serial number (mandatory)
crypto_device   = builtin               # OpenSSL engine to use for signing
signer_cert     = $dir/tsacert.pem      # The TSA signing certificate
                                        # (optional)
certs           = $dir/cacert.pem       # Certificate chain to include in reply
                                        # (optional)
signer_key      = $dir/private/tsakey.pem # The TSA private key (optional)

default_policy  = tsa_policy1           # Policy if request did not specify it
                                        # (optional)
other_policies  = tsa_policy2, tsa_policy3      # acceptable policies (optional)
digests         = md5, sha1             # Acceptable message digests (mandatory)
accuracy        = secs:1, millisecs:500, microsecs:100  # (optional)
clock_precision_digits  = 0     # number of digits after dot. (optional)
ordering                = yes   # Is ordering defined for timestamps?
                                # (optional, default: no)
tsa_name                = yes   # Must the TSA name be included in the reply?
                                # (optional, default: no)
ess_cert_id_chain       = no    # Must the ESS cert id chain be included?
                                # (optional, default: no)

# OpenSSL default section
[openssl_def]
engines = engine_section

# Engine scetion
[engine_section]
gost = gost_section
pkcs11 = pkcs11_section

# Engine gost section
[gost_section]
engine_id = gost
dynamic_path = /usr/lib64/engines/libgost.so
default_algorithms = ALL
#CRYPT_PARAMS = id-Gost28147-89-CryptoPro-A-ParamSet
init = 0

[pkcs11_section]
engine_id = pkcs11_gost
dynamic_path = /usr/lib64/engines/libpkcs11gost-engine.so
MODULE_PATH = /usr/lib/librtpkcs11ecp.so
init = 0