Установка и настройка openSSL (windows7)

Добрый день. Настраиваю openSSL для регистрации и аутентификации на портале через рутокен плагин. openssl.cfg у меня следующий:

openssl_conf = openssl_def

#
# OpenSSL example configuration file.
# This is mostly being used for generation of certificate requests.
#

# Note that you can include other files from the main configuration
openssl_conf = openssl_def

# file using the .include directive.
#.include filename

# This definition stops the following lines choking if HOME isn't
# defined.
HOME            = .

# Extra OBJECT IDENTIFIER info:
#oid_file        = $ENV::HOME/.oid
oid_section        = new_oids

# To use this configuration file with the "-extfile" option of the
# "openssl x509" utility, name here the section containing the
# X.509v3 extensions to use:
# extensions        =
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)

[ new_oids ]

# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
# Add a simple OID like this:
# testoid1=1.2.3.4
# Or use config file substitution like this:
# testoid2=${testoid1}.5.6

# Policies used by the TSA examples.
tsa_policy1 = 1.2.3.4.1
tsa_policy2 = 1.2.3.4.5.6
tsa_policy3 = 1.2.3.4.5.7

####################################################################
[ ca ]
default_ca    = CA_default        # The default ca section

####################################################################
[ CA_default ]

dir        = ./demoCA        # Where everything is kept
certs        = $dir/certs        # Where the issued certs are kept
crl_dir        = $dir/crl        # Where the issued crl are kept
database    = $dir/index.txt    # database index file.
#unique_subject    = no            # Set to 'no' to allow creation of
                    # several certs with same subject.
new_certs_dir    = $dir/newcerts        # default place for new certs.

certificate    = $dir/cacert.pem     # The CA certificate
serial        = $dir/serial         # The current serial number
crlnumber    = $dir/crlnumber    # the current crl number
                    # must be commented out to leave a V1 CRL
crl        = $dir/crl.pem         # The current CRL
private_key    = $dir/private/cakey.pem# The private key

x509_extensions    = usr_cert        # The extensions to add to the cert

# Comment out the following two lines for the "traditional"
# (and highly broken) format.
name_opt     = ca_default        # Subject Name options
cert_opt     = ca_default        # Certificate field options

# Extension copying option: use with caution.
# copy_extensions = copy

# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
# so this is commented out by default to leave a V1 CRL.
# crlnumber must also be commented out to leave a V1 CRL.
# crl_extensions    = crl_ext

default_days    = 365            # how long to certify for
default_crl_days= 30            # how long before next CRL
default_md    = default        # use public key default MD
preserve    = no            # keep passed DN ordering

# A few difference way of specifying how similar the request should look
# For type CA, the listed attributes must be the same, and the optional
# and supplied fields are just that :-)
policy        = policy_match

# For the CA policy
[ policy_match ]
countryName        = match
stateOrProvinceName    = match
organizationName    = match
organizationalUnitName    = optional
commonName        = supplied
emailAddress        = optional

# For the 'anything' policy
# At this point in time, you must list all acceptable 'object'
# types.
[ policy_anything ]
countryName        = optional
stateOrProvinceName    = optional
localityName        = optional
organizationName    = optional
organizationalUnitName    = optional
commonName        = supplied
emailAddress        = optional

####################################################################
[ req ]
default_bits        = 2048
default_keyfile     = privkey.pem
distinguished_name    = req_distinguished_name
attributes        = req_attributes
x509_extensions    = v3_ca    # The extensions to add to the self signed cert

# Passwords for private keys if not present they will be prompted for
# input_password = secret
# output_password = secret

# This sets a mask for permitted string types. There are several options.
# default: PrintableString, T61String, BMPString.
# pkix     : PrintableString, BMPString (PKIX recommendation before 2004)
# utf8only: only UTF8Strings (PKIX recommendation after 2004).
# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
# MASK:XXXX a literal mask value.
# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
string_mask = utf8only

# req_extensions = v3_req # The extensions to add to a certificate request

[ req_distinguished_name ]
countryName            = Country Name (2 letter code)
countryName_default        = AU
countryName_min            = 2
countryName_max            = 2

stateOrProvinceName        = State or Province Name (full name)
stateOrProvinceName_default    = Some-State

localityName            = Locality Name (eg, city)

0.organizationName        = Organization Name (eg, company)
0.organizationName_default    = Internet Widgits Pty Ltd

# we can do this but it is not needed normally :-)
#1.organizationName        = Second Organization Name (eg, company)
#1.organizationName_default    = World Wide Web Pty Ltd

organizationalUnitName        = Organizational Unit Name (eg, section)
#organizationalUnitName_default    =

commonName            = Common Name (e.g. server FQDN or YOUR name)
commonName_max            = 64

emailAddress            = Email Address
emailAddress_max        = 64

# SET-ex3            = SET extension number 3

[ req_attributes ]
challengePassword        = A challenge password
challengePassword_min        = 4
challengePassword_max        = 20

unstructuredName        = An optional company name

[ usr_cert ]

# These extensions are added when 'ca' signs a request.

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType            = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment            = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl        = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This is required for TSA certificates.
# extendedKeyUsage = critical,timeStamping

[ v3_req ]

# Extensions to add to a certificate request

basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment

[ v3_ca ]


# Extensions for a typical CA


# PKIX recommendation.

subjectKeyIdentifier=hash

authorityKeyIdentifier=keyid:always,issuer

basicConstraints = critical,CA:true

# Key usage: this is typical for a CA certificate. However since it will
# prevent it being used as an test self-signed certificate it is best
# left out by default.
# keyUsage = cRLSign, keyCertSign

# Some might want this also
# nsCertType = sslCA, emailCA

# Include email address in subject alt name: another PKIX recommendation
# subjectAltName=email:copy
# Copy issuer details
# issuerAltName=issuer:copy

# DER hex encoding of an extension: beware experts only!
# obj=DER:02:03
# Where 'obj' is a standard or added object
# You can even override a supported extension:
# basicConstraints= critical, DER:30:03:01:01:FF

[ crl_ext ]

# CRL extensions.
# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.

# issuerAltName=issuer:copy
authorityKeyIdentifier=keyid:always

[ proxy_cert_ext ]
# These extensions should be added when creating a proxy certificate

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType            = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment            = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl        = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This really needs to be in place for it to be a proxy certificate.
proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

####################################################################
[ tsa ]

default_tsa = tsa_config1    # the default TSA section

[ tsa_config1 ]

# These are used by the TSA reply generation only.
dir        = ./demoCA        # TSA root directory
serial        = $dir/tsaserial    # The current serial number (mandatory)
crypto_device    = builtin        # OpenSSL engine to use for signing
signer_cert    = $dir/tsacert.pem     # The TSA signing certificate
                    # (optional)
certs        = $dir/cacert.pem    # Certificate chain to include in reply
                    # (optional)
signer_key    = $dir/private/tsakey.pem # The TSA private key (optional)
signer_digest  = sha256            # Signing digest to use. (Optional)
default_policy    = tsa_policy1        # Policy if request did not specify it
                    # (optional)
other_policies    = tsa_policy2, tsa_policy3    # acceptable policies (optional)
digests     = sha1, sha256, sha384, sha512  # Acceptable message digests (mandatory)
accuracy    = secs:1, millisecs:500, microsecs:100    # (optional)
clock_precision_digits  = 0    # number of digits after dot. (optional)
ordering        = yes    # Is ordering defined for timestamps?
                # (optional, default: no)
tsa_name        = yes    # Must the TSA name be included in the reply?
                # (optional, default: no)
ess_cert_id_chain    = no    # Must the ESS cert id chain be included?
                # (optional, default: no)
ess_cert_id_alg        = sha1    # algorithm to compute certificate
                # identifier (optional, default: sha1)
                
[ openssl_def ]

engines = engine_section

[ engine_section ]

rtengine = gost_section

[ gost_section ]

dynamic_path = C:\Users\aspostnov\bin\sdk-rutoken\openssl\rtengine\bin\windows-x86_64\lib\rtengine.dll
MODULE_PATH = C:\Users\aspostnov\bin\sdk-rutoken\pkcs11\lib\windows-x86_64\rtpkcs11ecp.dll
RAND_TOKEN = pkcs11:manufacturer=Aktiv%20Co.;model=Rutoken%20ECP
default_algorithms = CIPHERS, DIGEST, PKEY, RAND

в переменной среды path указаны пути: C:\Program Files\OpenSSL-Win64\bin\openssl.cfg, C:\Program Files\OpenSSL-Win64\bin

При генерации ключа, как указано в инструкции командой:
openssl genpkey -algorithm gost2012_256 -pkeyopt paramset:A -out ca.key
вылетает ошибка: Algorithm gost2012_256 not found.

Очень прошу помощи, на что я не обратил внимание?
Спасибо!

Re: Установка и настройка openSSL (windows7)

Все решилось следующим образом:

openssl_conf = openssl_def

#
# OpenSSL example configuration file.
# This is mostly being used for generation of certificate requests.
#

# Note that you can include other files from the main configuration
openssl_conf = openssl_def

# file using the .include directive.
#.include filename

# This definition stops the following lines choking if HOME isn't
# defined.
HOME            = .

# Extra OBJECT IDENTIFIER info:
#oid_file        = $ENV::HOME/.oid
oid_section        = new_oids

# To use this configuration file with the "-extfile" option of the
# "openssl x509" utility, name here the section containing the
# X.509v3 extensions to use:
# extensions        =
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)

[ new_oids ]

# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
# Add a simple OID like this:
# testoid1=1.2.3.4
# Or use config file substitution like this:
# testoid2=${testoid1}.5.6

# Policies used by the TSA examples.
tsa_policy1 = 1.2.3.4.1
tsa_policy2 = 1.2.3.4.5.6
tsa_policy3 = 1.2.3.4.5.7

####################################################################
[ ca ]
default_ca    = CA_default        # The default ca section

####################################################################
[ CA_default ]

dir        = ./demoCA        # Where everything is kept
certs        = $dir/certs        # Where the issued certs are kept
crl_dir        = $dir/crl        # Where the issued crl are kept
database    = $dir/index.txt    # database index file.
#unique_subject    = no            # Set to 'no' to allow creation of
                    # several certs with same subject.
new_certs_dir    = $dir/newcerts        # default place for new certs.

certificate    = $dir/cacert.pem     # The CA certificate
serial        = $dir/serial         # The current serial number
crlnumber    = $dir/crlnumber    # the current crl number
                    # must be commented out to leave a V1 CRL
crl        = $dir/crl.pem         # The current CRL
private_key    = $dir/private/cakey.pem# The private key

x509_extensions    = usr_cert        # The extensions to add to the cert

# Comment out the following two lines for the "traditional"
# (and highly broken) format.
name_opt     = ca_default        # Subject Name options
cert_opt     = ca_default        # Certificate field options

# Extension copying option: use with caution.
# copy_extensions = copy

# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
# so this is commented out by default to leave a V1 CRL.
# crlnumber must also be commented out to leave a V1 CRL.
# crl_extensions    = crl_ext

default_days    = 365            # how long to certify for
default_crl_days= 30            # how long before next CRL
default_md    = default        # use public key default MD
preserve    = no            # keep passed DN ordering

# A few difference way of specifying how similar the request should look
# For type CA, the listed attributes must be the same, and the optional
# and supplied fields are just that :-)
policy        = policy_match

# For the CA policy
[ policy_match ]
countryName        = match
stateOrProvinceName    = match
organizationName    = match
organizationalUnitName    = optional
commonName        = supplied
emailAddress        = optional

# For the 'anything' policy
# At this point in time, you must list all acceptable 'object'
# types.
[ policy_anything ]
countryName        = optional
stateOrProvinceName    = optional
localityName        = optional
organizationName    = optional
organizationalUnitName    = optional
commonName        = supplied
emailAddress        = optional

####################################################################
[ req ]
default_bits        = 2048
default_keyfile     = privkey.pem
distinguished_name    = req_distinguished_name
attributes        = req_attributes
x509_extensions    = v3_ca    # The extensions to add to the self signed cert

# Passwords for private keys if not present they will be prompted for
# input_password = secret
# output_password = secret

# This sets a mask for permitted string types. There are several options.
# default: PrintableString, T61String, BMPString.
# pkix     : PrintableString, BMPString (PKIX recommendation before 2004)
# utf8only: only UTF8Strings (PKIX recommendation after 2004).
# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
# MASK:XXXX a literal mask value.
# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
string_mask = utf8only

# req_extensions = v3_req # The extensions to add to a certificate request

[ req_distinguished_name ]
countryName            = Country Name (2 letter code)
countryName_default        = AU
countryName_min            = 2
countryName_max            = 2

stateOrProvinceName        = State or Province Name (full name)
stateOrProvinceName_default    = Some-State

localityName            = Locality Name (eg, city)

0.organizationName        = Organization Name (eg, company)
0.organizationName_default    = Internet Widgits Pty Ltd

# we can do this but it is not needed normally :-)
#1.organizationName        = Second Organization Name (eg, company)
#1.organizationName_default    = World Wide Web Pty Ltd

organizationalUnitName        = Organizational Unit Name (eg, section)
#organizationalUnitName_default    =

commonName            = Common Name (e.g. server FQDN or YOUR name)
commonName_max            = 64

emailAddress            = Email Address
emailAddress_max        = 64

# SET-ex3            = SET extension number 3

[ req_attributes ]
challengePassword        = A challenge password
challengePassword_min        = 4
challengePassword_max        = 20

unstructuredName        = An optional company name

[ usr_cert ]

# These extensions are added when 'ca' signs a request.

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType            = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment            = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl        = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This is required for TSA certificates.
# extendedKeyUsage = critical,timeStamping

[ v3_req ]

# Extensions to add to a certificate request

basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment

[ v3_ca ]


# Extensions for a typical CA


# PKIX recommendation.

subjectKeyIdentifier=hash

authorityKeyIdentifier=keyid:always,issuer

basicConstraints = critical,CA:true

# Key usage: this is typical for a CA certificate. However since it will
# prevent it being used as an test self-signed certificate it is best
# left out by default.
# keyUsage = cRLSign, keyCertSign

# Some might want this also
# nsCertType = sslCA, emailCA

# Include email address in subject alt name: another PKIX recommendation
# subjectAltName=email:copy
# Copy issuer details
# issuerAltName=issuer:copy

# DER hex encoding of an extension: beware experts only!
# obj=DER:02:03
# Where 'obj' is a standard or added object
# You can even override a supported extension:
# basicConstraints= critical, DER:30:03:01:01:FF

[ crl_ext ]

# CRL extensions.
# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.

# issuerAltName=issuer:copy
authorityKeyIdentifier=keyid:always

[ proxy_cert_ext ]
# These extensions should be added when creating a proxy certificate

# This goes against PKIX guidelines but some CAs do it and some software
# requires this to avoid interpreting an end user certificate as a CA.

basicConstraints=CA:FALSE

# Here are some examples of the usage of nsCertType. If it is omitted
# the certificate can be used for anything *except* object signing.

# This is OK for an SSL server.
# nsCertType            = server

# For an object signing certificate this would be used.
# nsCertType = objsign

# For normal client use this is typical
# nsCertType = client, email

# and for everything including object signing:
# nsCertType = client, email, objsign

# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment

# This will be displayed in Netscape's comment listbox.
nsComment            = "OpenSSL Generated Certificate"

# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer

# This stuff is for subjectAltName and issuerAltname.
# Import the email address.
# subjectAltName=email:copy
# An alternative to produce certificates that aren't
# deprecated according to PKIX.
# subjectAltName=email:move

# Copy subject details
# issuerAltName=issuer:copy

#nsCaRevocationUrl        = http://www.domain.dom/ca-crl.pem
#nsBaseUrl
#nsRevocationUrl
#nsRenewalUrl
#nsCaPolicyUrl
#nsSslServerName

# This really needs to be in place for it to be a proxy certificate.
proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

####################################################################
[ tsa ]

default_tsa = tsa_config1    # the default TSA section

[ tsa_config1 ]

# These are used by the TSA reply generation only.
dir        = ./demoCA        # TSA root directory
serial        = $dir/tsaserial    # The current serial number (mandatory)
crypto_device    = builtin        # OpenSSL engine to use for signing
signer_cert    = $dir/tsacert.pem     # The TSA signing certificate
                    # (optional)
certs        = $dir/cacert.pem    # Certificate chain to include in reply
                    # (optional)
signer_key    = $dir/private/tsakey.pem # The TSA private key (optional)
signer_digest  = sha256            # Signing digest to use. (Optional)
default_policy    = tsa_policy1        # Policy if request did not specify it
                    # (optional)
other_policies    = tsa_policy2, tsa_policy3    # acceptable policies (optional)
digests     = sha1, sha256, sha384, sha512  # Acceptable message digests (mandatory)
accuracy    = secs:1, millisecs:500, microsecs:100    # (optional)
clock_precision_digits  = 0    # number of digits after dot. (optional)
ordering        = yes    # Is ordering defined for timestamps?
                # (optional, default: no)
tsa_name        = yes    # Must the TSA name be included in the reply?
                # (optional, default: no)
ess_cert_id_chain    = no    # Must the ESS cert id chain be included?
                # (optional, default: no)
ess_cert_id_alg        = sha1    # algorithm to compute certificate
                # identifier (optional, default: sha1)
                
[ openssl_def ]

engines = engine_section

[ engine_section ]

rtengine = gost_section

[ gost_section ]

dynamic_path = /Users/aspostnov/bin/sdk-rutoken/openssl/rtengine/bin/windows-x86_64/lib/rtengine.dll
MODULE_PATH = /Users/aspostnov/bin/sdk-rutoken/pkcs11/lib/windows-x86_64/rtpkcs11ecp.dll
RAND_TOKEN = pkcs11:manufacturer=Aktiv%20Co.;model=Rutoken%20ECP
default_algorithms = CIPHERS, DIGEST, PKEY, RAND

Нужно было указать OPENSSL_CONF вручную, команда "set OPENSSL_CONF=C:\path\to\openssl.cnf" не сработала. В путях path достаточно только C:\Program Files\OpenSSL-Win64\bin

Re: Установка и настройка openSSL (windows7)

Возник следующий вопрос:
создаю ключ: openssl genpkey -algorithm gost2012_256 -pkeyopt paramset:A -out ca.key
Создание самоподписанного сертификата УЦ:
openssl req -utf8 -x509 -key seckey.pem -out ca.crt
ошибка Can`t open seckey.pem.

В качестве seckey.pem разве не созданный на предыдущем шаге ca.key должен быть?

Спасибо!

Re: Установка и настройка openSSL (windows7)

AnatoliyP, здравствуйте!

в документации была неточность, исправились.  Вот правильная команда:

openssl req -utf8 -x509 -key ca.key -out ca.crt 

Re: Установка и настройка openSSL (windows7)

Добрый день!

Следующая команда почему-то тоже не работает:
openssl ca -keyfile ca.key -cert ca.crt -in user.csr -out user.crt -outform PEM -batch

ошибка:
ca: Option unknown option -outform
ca: Use -help for summary

пробовал так:
openssl ca -keyfile ca.key -cert ca.crt -in user.csr -out user.crt

ошибка:
Using configuration from C:\Program Files\OpenSSL-Win64\bin\openssl.cfg
ca: ./demoCA/newcerts is not a directory
./demoCA/newcerts: No error

нашел такой вариант, который сработал:
openssl x509 -req -days 365 -in user.csr -signkey ca.key -out user.crt

Можно ли использовать мой вариант. Если нет, подскажите пожалуйста, как настроить работу вашей команды?

Спасибо!!!

Re: Установка и настройка openSSL (windows7)

Добрый день!
Правильно ли я понимаю, что после создания сертификата user.crt по подписи user.csr в поле сертификата "Открытый ключ" должен быть тот ключ, который был использован про создании запроса user.csr?

Спасибо!

Re: Установка и настройка openSSL (windows7)

AnatoliyP,

Правильно ли я понимаю, что после создания сертификата user.crt по подписи user.csr в поле сертификата "Открытый ключ" должен быть тот ключ, который был использован про создании запроса user.csr?

В сертификате должен быть открытой ключ от ключей пары, что есть на токене. Этот же открытый ключ есть в запросе на сертификат.


пробовал так:
openssl ca -keyfile ca.key -cert ca.crt -in user.csr -out user.crt
ошибка:
Using configuration from C:\Program Files\OpenSSL-Win64\bin\openssl.cfg
ca: ./demoCA/newcerts is not a directory
./demoCA/newcerts: No error

Не хватает папки demoCA. Готовую можно взять например из Рутокен SDK: <sdk>/openssl/rtengine/samples/tool/demoCA

openssl x509 -req -days 365 -in user.csr -signkey ca.key -out user.crt

Все верно, вы сделали. The x509 utility can be used to sign certificates and requests: it can thus behave like a "mini CA" (https://www.openssl.org/docs/man1.0.2/man1/x509.html)

Re: Установка и настройка openSSL (windows7)

В общем проблема была в том, что у меня в системе windows7 openSSL установлен в пути:
C:\Program Files\OpenSSL-Win64
А openssl.cfg Находится
C:\Program Files\OpenSSL-Win64\bin\openssl.cfg
В настройках "са" внутри openssl.cfg основной путь, что был указан "./demoCA" не сработал.
под "." подразумевалась текущая директория, где находится openssl.cfg т.е.
C:\Program Files\OpenSSL-Win64\bin
Я в этой директории создавал demoCA, но это не работало.
Все сработало, когда я переместил demoCA по адресу "/Users/aspostnov/bin/openSSLca/demoCA"
Также там необходимо создать все файлы, что прописаны в настройках для ca в openssl.cfg.

Почему не работает "-outform PEM -batch" команды "openssl ca -keyfile ca.key -cert ca.crt -in user.csr -out user.crt -outform PEM -batch" я так и не разобрался, в итоге просто удалил и все сработало без "-outform PEM -batch".

Re: Установка и настройка openSSL (windows7)

Еще вопрос по документации:
Там где "Регистрация на портале" заключительная картинка.
зачем там parseCertificateFromString?
Мы же сертификат на фронт передаем в формате .pem, а функция importCertificate принимает сертификат как раз в формате .pem. В общем у меня все сработало без этого дополнительного шага parseCertificateFromString, но он сильно вводит в заблуждение.

Спасибо!

Re: Установка и настройка openSSL (windows7)

AnatoliyP, добрый день!

Большое спасибо за внимательное и вдумчивое чтение документации!

Блок-схема в конце раздела "Регистрация на портале" соответствует выполнению последних шагов из списка, указанного в начале раздела:

  • Получаем список подключенных к компьютеру устройств Рутокен ЭЦП 2.0

  • Генерируем ключевую пару по ГОСТ Р 34.10-2012 на выбранном Рутокен ЭЦП 2.0

  • Cоздаем запрос PKCS#10 на сертификат для сгенерированной ключевой пары

  • Отправляем запрос на сервер

  • На сервере создаем сертификат, привязываем к аккаунту (сам сертификат или его дескриптор). Следует отметить, что дескрипторы сертификатов, полученные при вызове функции enumerateCertificates, являются уникальными и неизменными

  • Отправляем сертификат на клиент

  • На клиенте визуализируем полученный сертификат

  • Импортируем полученный сертификат в Рутокен ЭЦП 2.0

Выполнение вызова parseCertificateFromString соответствует шагу визуализируем полученный сертификат.

Для других пользователей, зашедших в данную тему, отмечу, что речь в теме, в основном, касается документации, посвященной Встраиванию Рутокен ЭЦП 2.0 через Рутокен Плагин