Ответ от Власков Тимофей

  • Власков Тимофей
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

На данный момент нужно только подключить токен к системе.

Ответ от Андрей Кашкаха

  • Андрей Кашкаха
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

На указанный вами при регистрации e-mail высланы драйверы Rutoken S для Linux.

1.    Установите pcsclite и opensc
$ sudo apt-get install libpcsclite1 pcscd libccid opensc
2.    Перейдите в каталог с драйвером и запустите скрипт .sh. Например,
$ ./rutokens-driver-1.0.1_l86_installer.sh

Ответ от arsch

  • arsch
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Rutoken S 32K203Z
КриптоПро 3.6 R3
Mandriva 2010.2

Поставил из репозиториев:
pcsc-lite-1.5.5-2.1mdv2010.2
openct-0.6.20-1mdv2010.1
opensc-0.11.13-1.1mdv2010.2

Вывод некоторых команд:

# openct-tool atr
Detected Rutoken S driver
Card present, status changed
ATR: 3b 6f 00 ff 00 56 72 75 54 6f 6b 6e 73 30 20 00 00 90 00
# pcscd -afdddddd
00000000 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000013 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000232 pcscdaemon.c:512:main() pcsc-lite 1.5.5 daemon ready.
00002386 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0A89, PID: 0x0020
00018575 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
00000601 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0458, PID: 0x003A
00000825 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x04FC, PID: 0x0C25
00001020 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
00001835 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
00000646 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1687, PID: 0x6211
00001038 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
# opensc-tool -a
[opensc-tool] reader-pcsc.c:896:pcsc_detect_readers: SCardListReaders failed: 0x8010002e
[opensc-tool] reader-pcsc.c:1015:pcsc_detect_readers: returning with: No readers found
Using reader with a card: Rutoken S driver
3b:6f:00:ff:00:56:72:75:54:6f:6b:6e:73:30:20:00:00:90:00

Установил КриптоПро 3.6 R3 и пакеты cprocsp-rdr-pcsc-64-3.6.1-4.x86_64.rpm, rtSupCP-64-3.6.1-4.x86_64.rpm
Собственно проблема: не удается просмотреть имя соединения с Rutoken и зарегистрировать считыватель в КриптоПро

# list_pcsc
ERROR: SCardListReaders(NULL)
# /opt/cprocsp/sbin/ia32/cpconfig -hardware reader -add 'Aktiv Rutoken S 00 00'
Adding new reader:
Nick name: Aktiv Rutoken S 00 00
Failed, code:0x1008
Error code:4104, Connection error.

Можете подсказать, что не так сконфигурировано? Читал форум, пишут в основном про установку на Debian/Ubuntu или SuSe, про Mandriva не встречал. Пробовал ставить на OpenSuSe 11.4, все получилось. Можно ли получить рекомендации по установке на Mandriva?

Ответ от Кирилл Мещеряков

  • Кирилл Мещеряков
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

arsch пишет:

Rutoken S 32K203Z
КриптоПро 3.6 R3
Mandriva 2010.2

Поставил из репозиториев:
pcsc-lite-1.5.5-2.1mdv2010.2
openct-0.6.20-1mdv2010.1
opensc-0.11.13-1.1mdv2010.2

Вывод некоторых команд:

# openct-tool atr
Detected Rutoken S driver
Card present, status changed
ATR: 3b 6f 00 ff 00 56 72 75 54 6f 6b 6e 73 30 20 00 00 90 00
# pcscd -afdddddd
00000000 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000013 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000232 pcscdaemon.c:512:main() pcsc-lite 1.5.5 daemon ready.
00002386 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0A89, PID: 0x0020
00018575 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
00000601 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0458, PID: 0x003A
00000825 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x04FC, PID: 0x0C25
00001020 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
00001835 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
00000646 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1687, PID: 0x6211
00001038 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
# opensc-tool -a
[opensc-tool] reader-pcsc.c:896:pcsc_detect_readers: SCardListReaders failed: 0x8010002e
[opensc-tool] reader-pcsc.c:1015:pcsc_detect_readers: returning with: No readers found
Using reader with a card: Rutoken S driver
3b:6f:00:ff:00:56:72:75:54:6f:6b:6e:73:30:20:00:00:90:00

Установил КриптоПро 3.6 R3 и пакеты cprocsp-rdr-pcsc-64-3.6.1-4.x86_64.rpm, rtSupCP-64-3.6.1-4.x86_64.rpm
Собственно проблема: не удается просмотреть имя соединения с Rutoken и зарегистрировать считыватель в КриптоПро

# list_pcsc
ERROR: SCardListReaders(NULL)
# /opt/cprocsp/sbin/ia32/cpconfig -hardware reader -add 'Aktiv Rutoken S 00 00'
Adding new reader:
Nick name: Aktiv Rutoken S 00 00
Failed, code:0x1008
Error code:4104, Connection error.

Можете подсказать, что не так сконфигурировано? Читал форум, пишут в основном про установку на Debian/Ubuntu или SuSe, про Mandriva не встречал. Пробовал ставить на OpenSuSe 11.4, все получилось. Можно ли получить рекомендации по установке на Mandriva?

Добрый день!

Вам стоит удалить openct и использовать драйвер Рутокена S, который поставляется вместе с криптопро.

Ответ от arsch

  • arsch
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Кирилл Мещеряков пишет:

Вам стоит удалить openct и использовать драйвер Рутокена S, который поставляется вместе с криптопро.

Сделал. Похоже pcscd теперь подгружает драйвер:

# pcscd -afdddddd
00000000 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000013 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:230:DebugLogSetLevel() debug level=debug
00000263 pcscdaemon.c:512:main() pcsc-lite 1.5.5 daemon ready.
00118949 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
00000605 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0458, PID: 0x003A
00001021 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
00001836 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
00001452 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1687, PID: 0x6211
00001016 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
09533643 hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0A89, PID: 0x0020
00000015 hotplug_libhal.c:366:HPAddDevice() Adding USB device: usb_device_a89_20_noserial_if0
01000876 readerfactory.c:1024:RFInitializeReader() Attempting startup of Aktiv Co. Rutoken S 00 00 using /usr/lib/pcsc/drivers//ifd-RutokenS.bundle/Contents/Linux/libccid.so
00000178 readerfactory.c:877:RFBindFunctions() Loading IFD Handler 3.0
ifdhandler.c:1323:init_driver() Driver version: 1.3.9
ifdhandler.c:1336:init_driver() LogLevel: 0x0003
ifdhandler.c:1356:init_driver() DriverOptions: 0x0000
ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0a89/0020:libhal:/org/freedesktop/Hal/devices/usb_device_a89_20_noserial_if0
ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr)
ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver
ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version.
ccid_usb.c:393:OpenUSBByName() Extra field for 001/006 has a wrong length: 0
ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 0A89/0020 (Aktiv Co. Rutoken S)
ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 001/006
ccid_usb.c:796:get_data_rates() IFD does not support GET_DATA_RATES request: Broken pipe
ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFB0
00001554 readerfactory.c:249:RFAddReader() Using the pcscd polling thread
ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFAE
ifdhandler.c:353:IFDHGetCapabilities() Reader supports 1 slot(s)
ifdhandler.c:924:IFDHPowerICC() lun: 0, action: PowerUp
00001251 ATR: 3B 6F 00 FF 00 56 72 75 54 6F 6B 6E 73 30 20 00 00 90 00 
00000018 atrhandler.c:102:ATRDecodeAtr() Conv: 01, Y1: 06, K: 0F
00000010 atrhandler.c:120:ATRDecodeAtr() TA1: FFFFFFFF, TB1: 00, TC1: FF, TD1: FFFFFFFF
00000009 atrhandler.c:251:ATRDecodeAtr() CurrentProtocol: 1, AvailableProtocols: 1
00000014 Card ATR: 3B 6F 00 FF 00 56 72 75 54 6F 6B 6E 73 30 20 00 00 90 00

Но при запущенном демоне pcscd постоянно мигает светодиод на рутокене.
А для КриптоПро токен по-прежнему не виден:

# list_pcsc
ERROR: SCardListReaders()

Ответ от Кирилл Мещеряков

  • Кирилл Мещеряков
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Очень странно. Попробуйте пожалуйста запустить pcsc_scan.

Ответ от arsch

  • arsch
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

# pcsc_scan
PC/SC device scanner
V 1.4.15 (c) 2001-2009, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.5.5
SCardEstablishContext: RPC transport error.

Ответ от Кирилл Мещеряков

  • Кирилл Мещеряков
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

В данном случае сообщение указывает на то что у Вас не запущен pcscd.

Запустите демон pcscd в отдельной консоли, а затем попробуйте запустить pcsc_scan.

Ответ от arsch

  • arsch
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Демон запущен, при остановленном сообщение другое:

# pcsc_scan
PC/SC device scanner
V 1.4.15 (c) 2001-2009, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.5.5
SCardEstablishContext: Service not available.

Ответ от Евгений Мироненко

  • Евгений Мироненко
  • Техническая поддержка
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Добрый день.

Для получения большего объема отладочной информации для диагностики проблемы, пожалуйста, выполните следующие действия:
0. Убедитесь, что pcscd не запущен:

#killall pcscd
#killall pcscd
#killall pcscd

1. Запустите pcscd следующим образом:

#LIBCCID_ifdLogLevel=0x0F pcscd -afd > log_pcscd.txt

2. Подключите Rutoken S
3. Запустите pcsc_scan:

#PCSCLITE_DEBUG=0 pcsc_scan &> log_pcsclite.txt

Ответ от arsch

  • arsch
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

log_pcscd.txt

debuglog.c:230:DebugLogSetLevel() debug level=debug
pcscdaemon.c:512:main() pcsc-lite 1.5.5 daemon ready.
hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1687, PID: 0x6211
hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0458, PID: 0x003A
hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x8087, PID: 0x0020
hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002
hotplug_libhal.c:318:get_driver() Looking a driver for VID: 0x0A89, PID: 0x0020
hotplug_libhal.c:366:HPAddDevice() Adding USB device: usb_device_a89_20_noserial_if0
readerfactory.c:1024:RFInitializeReader() Attempting startup of Aktiv Co. Rutoken S 00 00 using /usr/lib/pcsc/drivers//ifd-RutokenS.bundle/Contents/Linux/libccid.so
readerfactory.c:877:RFBindFunctions() Loading IFD Handler 3.0
ifdhandler.c:1323:init_driver() Driver version: 1.3.9
ifdhandler.c:1336:init_driver() LogLevel: 0x0003
ifdhandler.c:1346:init_driver() LogLevel from LIBCCID_ifdLogLevel: 0x000F
ifdhandler.c:1356:init_driver() DriverOptions: 0x0000
ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0a89/0020:libhal:/org/freedesktop/Hal/devices/usb_device_a89_20_noserial_if0
ccid_usb.c:158:OpenUSBByName() Reader index: 0, Device: usb:0a89/0020:libhal:/org/freedesktop/Hal/devices/usb_device_a89_20_noserial_if0
ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr)
ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver
ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version.
ccid_usb.c:311:OpenUSBByName() Checking device: 001/006
ccid_usb.c:361:OpenUSBByName() Trying to open USB bus/device: 001/006
ccid_usb.c:393:OpenUSBByName() Extra field for 001/006 has a wrong length: 0
ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 0A89/0020 (Aktiv Co. Rutoken S)
ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 001/006
ccid_usb.c:852:ControlUSB() request: 0x03
receive: 
ccid_usb.c:796:get_data_rates() IFD does not support GET_DATA_RATES request: Broken pipe
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFB0
readerfactory.c:249:RFAddReader() Using the pcscd polling thread
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFAE
ifdhandler.c:353:IFDHGetCapabilities() Reader supports 1 slot(s)
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:924:IFDHPowerICC() lun: 0, action: PowerUp
ccid_usb.c:852:ControlUSB() request: 0x63
send: 
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 10 
ccid_usb.c:852:ControlUSB() request: 0x62
receive: 3B 6F 00 FF 00 56 72 75 54 6F 6B 6E 73 30 20 00 00 90 00 
ATR: 3B 6F 00 FF 00 56 72 75 54 6F 6B 6E 73 30 20 00 00 90 00 
atrhandler.c:102:ATRDecodeAtr() Conv: 01, Y1: 06, K: 0F
atrhandler.c:120:ATRDecodeAtr() TA1: FFFFFFFF, TB1: 00, TC1: FF, TD1: FFFFFFFF
atrhandler.c:251:ATRDecodeAtr() CurrentProtocol: 1, AvailableProtocols: 1
Card ATR: 3B 6F 00 FF 00 56 72 75 54 6F 6B 6E 73 30 20 00 00 90 00 
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
winscard_msg_srv.c:239:SHMProcessEventsServer() Common channel packet arrival
winscard_msg_srv.c:248:SHMProcessEventsServer() SHMProcessCommonChannelRequest detects: 10
pcscdaemon.c:147:SVCServiceRunLoop() A new context thread creation is requested: 10
winscard_svc.c:133:ContextThread() Thread is started: 10
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
winscard_msg_srv.c:306:SHMProcessEventsContext() Client has disappeared: 10
winscard_svc.c:146:ContextThread() Client die: 10
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
pcscdaemon.c:588:signal_trap() Preparing for suicide
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present
ifdhandler.c:1186:IFDHICCPresence() lun: 0
ccid_usb.c:852:ControlUSB() request: 0xA0
receive: 00 
ifdhandler.c:1305:IFDHICCPresence() Card present

log_pcsclite.txt

winscard_clnt.c:565:SCardEstablishContextTH() Your pcscd is too old and does not support CMD_VERSION
PC/SC device scanner
V 1.4.15 (c) 2001-2009, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.5.5
SCardEstablishContext: RPC transport error.

В принципе ничего нового не увидел, кроме "winscard_clnt.c:565:SCardEstablishContextTH() Your pcscd is too old..."

Ответ от Евгений Мироненко

  • Евгений Мироненко
  • Техническая поддержка
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Судя по log_pcscd.txt, драйвер Rutoken S поднимается и корректно работает, а проблема в соединении между pcscd и libpcsclite. Попробуйте установить более новую версию pcsclite, например 1.6.7

Ответ от arsch

  • arsch
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Удалил pcsc_lite версии 1.5.5 и поставил свежий 1.8.8.
Результат:

# pcscd -afd
00000000 debuglog.c:269:DebugLogSetLevel() debug level=debug
00000019 debuglog.c:269:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:269:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:269:DebugLogSetLevel() debug level=debug
00000002 debuglog.c:269:DebugLogSetLevel() debug level=debug
00000003 debuglog.c:269:DebugLogSetLevel() debug level=debug
00000081 configfile.l:298:DBGetReaderList() Parsing conf file: /etc/reader.conf.d
00000012 pcscdaemon.c:525:main() pcsc-lite 1.8.8 daemon ready.
00039374 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000094 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000093 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0020, path: /dev/bus/usb/001/002
00000097 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x1687, PID: 0x6211, path: /dev/bus/usb/001/003
00000090 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0020, path: /dev/bus/usb/001/002
00000110 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000086 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/002/001
00000093 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0020, path: /dev/bus/usb/002/002
00000096 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x0458, PID: 0x003A, path: /dev/bus/usb/002/003
00000090 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x8087, PID: 0x0020, path: /dev/bus/usb/002/002
14527062 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x0A89, PID: 0x0020, path: /dev/bus/usb/001/004
00000010 hotplug_libudev.c:312:HPAddDevice() Adding USB device: Aktiv Co. Rutoken S
00000037 readerfactory.c:978:RFInitializeReader() Attempting startup of Aktiv Co. Rutoken S 00 00 using /usr/lib/pcsc/drivers/ifd-RutokenS.bundle/Contents/Linux/libccid.so
00010134 readerfactory.c:868:RFBindFunctions() Loading IFD Handler 3.0
ifdhandler.c:1323:init_driver() Driver version: 1.3.9
ifdhandler.c:1336:init_driver() LogLevel: 0x0003
ifdhandler.c:1356:init_driver() DriverOptions: 0x0000
ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0a89/0020:libudev:0:/dev/bus/usb/001/004
ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr)
ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver
ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version.
ccid_usb.c:393:OpenUSBByName() Extra field for 001/004 has a wrong length: 0
ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 0A89/0020 (Aktiv Co. Rutoken S)
ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 001/004
ccid_usb.c:796:get_data_rates() IFD does not support GET_DATA_RATES request: Broken pipe
ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFB3
00002480 readerfactory.c:327:RFAddReader() Using the pcscd polling thread
ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFAE
ifdhandler.c:353:IFDHGetCapabilities() Reader supports 1 slot(s)
ifdhandler.c:924:IFDHPowerICC() lun: 0, action: PowerUp
00001380 eventhandler.c:256:EHStatusHandlerThread() powerState: POWER_STATE_POWERED
00000018 Card ATR: 3B 6F 00 FF 00 56 72 75 54 6F 6B 6E 73 30 20 00 00 90 00 
ifdhandler.c:924:IFDHPowerICC() lun: 0, action: PowerDown
00400830 eventhandler.c:446:EHStatusHandlerThread() powerState: POWER_STATE_UNPOWERED

И самое желаемое: 

# /opt/cprocsp/bin/ia32/list_pcsc
available reader: Aktiv Co. Rutoken S 00 00

Однако, т.к. собирал pcsc-lite из исходников, потерял последнее средство диагностики в виде утилиты pcsc_scan из пакета pcsc-tools - пришлось удалить из-за неудовлетворенных зависимостей. А также почему-то не создался инициализационный скрипт в /etc/init.d для pcscd и соответствующие симлинки в rcN.

Ответ от Евгений Мироненко

  • Евгений Мироненко
  • Техническая поддержка
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Проще всего подыскать соответствующий пакет установки.

Ответ от arsch

  • arsch
  • Посетитель
  • Неактивен

Re: Как правильно устанавливать RuToken в Linux?

Пакеты от других дистрибутивов прикручивать опасаюсь, я не большой специалист в этом.
Взял скрипт с другой машины, сгенерированный при установке старого пакета pcsc_lite, выполнил chkconfig pcscd on (уровни запуска/остановки к счастью есть в заголовке) и все заработало.
Кирилл и Евгений, спасибо за помощь! Снести openCT и заменить его адаптацией от КриптоПро было переломным моментом, я бы не скоро еще догадался отказаться от openCT. Хотя, если внимательно посмотреть логическую схему на сайте, это становится очевидным.